Teradek Serv Pro
The Teradek Serv Pro is a wireless video transmitter that creates a network that can be connected to by any tablet or phone. Once connected to the network you can use the Teradek Vuer app to view the video stream connected to the Serv Pro
Multi-Cam Setup
With Serv-Pro On Camera
To setup multicam you will make one Serv Pro an access point, connect the other Serv Pro to it, then you'll be able to access both cameras once you connect to the network created. To do this you will:
- Setup the A-camera Serv Pro to Wireless Access Point mode.
- Setup the B-Camera Serv Pro to Infrastructure mode.
- It will then allow you to search available networks, find the network created by the A-Cam serv pro.
- Connect to that network.
- Connect your tablet or phone to the A-Cam Serv Pro.
- Open the Vuer App and click Camera in the top left.
- Connect the device to the appropriate camera
- Click Done
- Now you can select from A or B cameras, or you can select a two up or 4 up view.
Serv-Pro on Monitors
This process might be a bit different as it might be better to just hard wire the two serv pros together if you already have a monitor with wireless video from multiple cameras flowing to it. The process is still a little bit unknown for this setup.
Recovery
If you are having any issues with the Serv Pro, a recovery may allow you to factory reset the device and get it working properly again.