Swapping Globes

This would cover both HMI globes and tungsten globes.

When putting a new globe in a light you want to be sure to wear gloves to prevent the oils in your fingers from interferring with the coating of the globe. As an additional precaution you can use alcohol wipes to clean the globe as you put it in. This is more common with globes over 4k for both HMI and tungsten because of the cost of these globes and how often they are handled.

When put in the light, make sure they are firmly seated.

Broken HMI globes should go in E-Waste, but tungsten bulbs can be put into the trash.