SmallHD Calibration Tool
Jump to navigation
Jump to search
- Remove Protective Screen from Monitor
To ensure consistent results, remove any protective screens from the monitor.
- Spin White Disk Away From Lens
This step is very important. The white disk is purely protective and there is a glass lens underneath it. The white disk spins around to the side of the probe.
- Plug USB into Monitor using appropriate adapters.
There are different USB sizes for each monitor, some even take Lemo to USB. Using the proper adapter you will plug in the USB cable.
- Follow Steps on Monitor
The monitor will pop up with an automatic calibration tool. Follow these steps.
If you have any questions you can always refer to this video made by SmallHD.