Litegear Litemat (Plus Series)
The Litegear litemats are a bi-color LED panel light made by litegear. It's a lightweight soft-light that could be used for a key, backlight, or fill light.
Uses
Because of its weight, it is oftentimes a go-to for rigging for location work where a larger heavier unit like a S60 Skypanel might not work.
The Litemat 4 is usually used as a key or fill light because of the large size of the source, while the litemat 2L is usually used as a backlight since it’s skinner, but has a wide spread.
QC Process
Accessories
This unit comes with 1/4, 1/2, and full grid diffusion faces and an egg crate. They also have snap grid egg crates for the Litemat of varying degrees.
Troubleshooting
The head feeders often go bad, so if it’s not turning on, try plugging the head directly into the ballast. If that doesn’t work, try replacing each part to narrow down which piece has failed. Otherwise there are not many user serviceable parts.
Substitutions
You may be able to replace this with 4 titan tubes in a kino housing, also the S60 with a chimera could work as long as they don’t need a lightweight unit and are just looking for an LED panel.