View source for Grid Clamp (Baby Cheeseboro)

[[File:BabyGridClamp.png|200px|thumb| right | Baby Grid Clamp]]
[[category: Equipment]]
A Baby Grid Clamp or Baby Cheeseboro is a clamp that will attach to 1-1/4" to 1-1/2" speedrail and give you a 5/8" baby pin to rig to.

=Uses=

These can be used as rigging points, similar to a pipe clamp. The only difference is that there are less moving pieces with a baby cheeseboro and are a bit more rigid. For this reason they should be used when a point is not meant to move at all. If a light is being hung, then a baby pipe clamp will be preferable, mostly because it is easy to pan the light even if you don't have a cotter pin in, plus you can hang the clamp on the pipe as you tighten it, while a baby cheeseboro must be hung first, then the light rigged onto it. 

A baby cheeseboro is also slightly more low profile than a pipe clamp.